How to Utilise Rubbing Compound

Rubbing compound, also known as cutting glue, is a synthetic substance used to grind the surface layers of an automobile’s dull or damaged paint. An easy-to-use restorer, rubbing compound breathes new life to your car’s old paintwork, allowing consumers to employ a new top coat and achieve a smooth, even finish. It’s also an easy and economical way to eliminate a scratch. There is no need to be worried about the abrasives creating damage; cars are finished with clear coats which protect the paint under.

Before using rubbing compound, consumers have to completely understand how to employ and remove the compound to securely achieve the best outcomes.¬†Are you looking tool shop in Bayswater? You can contact Waugh’s Industrial Supplies. It is always wise to be particularly safe when using abrasives. Before applying rubbing compound, users have to prepare the area then decide whether to use the compound by hand or with an orbital sander.

How to utilise Rubbing Compound
Rubbing compound works by smoothing the surface of the paint and eliminating dead, oxidised paint by physically removing the surface layer. Consumers can also use rubbing compound to repair heavy scratches, sandpaper marks, spotting, and surface contaminants.

Before compounding, guarantee that the vehicle is completely clean and dry. The best way to do it is to wash the vehicle with soapy water, rinse, then use detailing clay that eliminates any dangerous contaminants and then prepare the vehicle for compounding and waxing.

When the vehicle is completely clean and ready, inspect the paintwork to determine its state and choose which steps to take. Some vehicles may just require waxing, though others may need compounding and waxing.

When using rubbing compound on a car, never work in direct sunlight. Preferably work inside in a shop or garage, but when a building isn’t available, compound in a shady area. Work on a single body panel of the vehicle at a time to ensure that the rubbing compound doesn’t sit on the paint to get too long. For example, a user planning to compound the hood, door, fender, and roof, finishes compounding the hood before moving onto the next area, and so on.

Utilising Rubbing Compound with an Orbital Polisher
Among the quickest and easiest ways to use rubbing compound is using an orbital polisher along with a wool pad. Do not reuse wool pads used for compounding for polishing or waxing. Instead, users mark them so that they only ever use these pads for compounding.

Correctly centre the wool pad onto the orbital polisher. If needed, use a pad-centering instrument to ensure appropriate alignment. Wash or spur the pad using a spurring tool. This will help to keep the pad fluffy and remove some matted or caked parts of wool. Spur the pad frequently during the compounding process to ensure that it doesn’t cause further harm to your paint. Spur the mat between body panels in a bare minimum.

After the orbital polisher and pad are correctly prepared, apply a thin line of the compound directly to the automobile paint. If the rubbing compound is in a jar, use a paper towel to scoop out some and apply it to the paint. The best method of applying rubbing chemical is to employ a good quantity of pressure with an overlapping circular motion. Immediately after application, buff the room with the wool pad.

Once buffing is finished, the place requires polishing. This helps to fill the paint and give it a shiny, protective end. For additional safety and shine, wax the area with a premium auto wax, paint sealant, or wax.

Applying Rubbing Compound by Hand
Whether an orbital polisher isn’t available, do the compounding process by hand with firm pressure and a microfiber towel. As using an orbital polisher, work one area at a time and apply a thin line of chemical into the paint. But rather than buffing using a polisher and a wool pad, then use a microfiber towel or applicator pad to buff the region. Then, follow the same circular motion technique and polish the area, then wax to get extra shine and protection if necessary.

Whether compounding using a polisher or by hand, consumers may also choose to rub chemical in a spray or liquid form, offered by some producers to give the user additional program options.

Leave a Reply

Your email address will not be published. Required fields are marked *